11
Proof of Performance
10
www.idealnetworks.net
LanTEK IV configuration: Settings menu
Press on the gear icon at the top right of the screen to open the Settings
menu
Press “SYNC” to import or export test files. Import transfers blank test
files from a USB key or AnyWARE Cloud to the LanTEK. Export transfers
completed test results to a USB key or AnyWARE Cloud.
Press Accept after choosing an option.
Choose language
Connect to Wi-Fi hotspot
Set Reference: calibrate system for
Cat 8.2, RJ45 patch cord adapters
and fibre optic test cords
View calibration information / Copy
the calibration certificate to a USB
key in PDF format
Start the tone
generator
Update device software
Device model, software versions,
serial number, MAC address
Choose user interface mode
To Next Page
Loading...
