15
Proof of Performance
14
www.idealnetworks.net
User Interface Operating Modes
Ensure the installed software is version
1.50 or higher
The installed software version is displayed
on the information screen while booting.
Select the desired operation mode in the
Preferences menu.
LanTEK IV version 1.50 software adds a new user interface mode that allows
testing without the need to create a job with pre-configured tests.
The new mode is called “Standard” and the existing mode is called “Advanced”.
Open the Preferences menu
Press the gear icon to open the Preferences
menu.
Open Operation Mode selection
Press Operation Mode to reveal the mode
selection screen.
The currently selected Operation Mode is
shown in small font.
Choose desired mode
Standard = simplified mode that allows
setting name and specifications for each
individual test.
Advanced = mode that allows pre-
configuration of jobs with names and
specifications prior to testing.
To Next Page
Loading...
