25
Proof of Performance
24
www.idealnetworks.net
Enter the name of the new job using
the touch keyboard; In this example,
the name is "Building 1".
Confirm with the check mark at the
top-right of the screen.
Optional test identifiers (building, floor,
room, rack, panel, etc.) can be added
to each test ID to provide more details.
ANSI/TIA-606 mode follows the
naming convention defined by the TIA-
606 standard.
The Custom mode allows identifiers
that describe the location of the cable
under test.
Creating test files
To Next Page
Loading...
