IDEAL Networks LanTEK IV - Creating Test Files: Cable Standards and Link Models

30
www.idealnetworks.net
Choose the desired test standard
family.
In this example select:
ISO/IEC 11801-1: 2017 A1/2
Select the certification method.
Permanent link is the most common
and certifies from patch panel to work
area outlet. Cable terminated with
female connectors at both ends.
In Channel certification, two patch
cords (equipment room and work
area) are added. This is more
complete since it also takes into
account the quality of the cords in
addition to the horizontal link.
Channel adapters are required and
the patch cords used for certification
must remain in place after each test.
Creating test files