IDEAL Networks LanTEK IV - Creating Test Files: Cable Type and Optional Measurements

32
www.idealnetworks.net
The MAX limit options test the
same links with additional optional
measurements carried out: TCL,
ELTCTL, and DC resistance unbalance
(DCRU).
LanTEK IVs always measure these
parameters up to 500MHz and the
results are displayed as informative
with an “i” indicator instead of PASS/
FAIL.
If the MAX test is selected then these
measurements are marked PASS/FAIL
according to the limits defined by the
selected test standard.
Select Class EA PL1 PL2 CP1.
The Cable Type selection is intended
to provide more detail on the nature
of the components installed: the
cable category, shield type, NVP
and optionally the brand and model.
The brand of the connectors may be
defined if desired.
The options chosen here do not
aect the test limits or performance
measurements, the only exception
being the length measurement.
Press the cable search icon to choose
from the list of manufacturers of on-
board cabling systems.
Creating test files