EasyManua.ls Logo

IDEAL Networks LanTEK IV - Creating Test Files: Performing NVP Measurement

IDEAL Networks LanTEK IV
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
www.idealnetworks.net
Connect a link of 20 meters / 65 feet
minimum between the two LanTEK IV
handsets.
Enter the length of the link including
any test cords.
In this test, the link is 24 meters plus
the 2 permanent link adapters of 2
meters each, for a total of 28 meters.
Enter 28 into the length field. Note,
the units are set to meters or feet
depending on the units set in the
tester preferences.
Press the blue “Measure NVP” button
to continue.
The calculated NVP will be displayed,
here it is 77%.
Press the check mark to confirm and
continue.
Creating test files

Other manuals for IDEAL Networks LanTEK IV

Related product manuals