18
16 ISOLATING VALVES
check valve
strainer cap
strainer screen
isolating valve
direction
of flow
flow regulator
Isolation valves (not supplied with this product) MUST be tted to permit future
maintenance. Fitting of strainers (lters) is also recommended.
These should be tted as close as is practicable to the water supply inlets of
the thermostatic shower valve.
Both isolation valves & strainers should be installed in an easily accessible
location.
An in-line combined isolating valve (shown below) can be purchased by
contacting Customer Care. Spares code E960613NU contains a pair of these
valves. This valve also contains a ow regulator and check valve (which can be
removed if not required).
15 CLEANING
When cleaning the shower valve always use soap based cleaners. never use
abrasive or scouring powders and never use cleaners containing alcohol, am-
monia, nitric acid, phosphoric acid, organic solvents or disinfectants.
To Next Page
Loading...
Need help?
General
