Page 1
Introduction
Warning
To avoid shock or injury, do not perform the verification
tests or calibration procedures described in this manual
unless you are qualified to do so.
The information provided in this document is for the use
of qualified personnel only.
Caution
The 61-700 series contains parts that can be damaged by static
discharge. Follow the standard practices for handling static sensitive
devices.
For additional information about IDEAL INDUSTRIES, INC. and its products,
and services, visit IDEAL INDUSTRIES, INC. web site at:
www.idealindustries.com
Precautions and Safety Information
Use the meter only as described in the Users Manual. If you do not
do so, the protection provided by the meter may be impaired.
Read the “Safety Information” page before servicing this product.
In this manual, a Warning identifies conditions and actions that
pose hazard (s) to the user; a Caution identifies conditions and
actions that may damage the meter or the test instruments.
The Symbols
The symbols used on the Meter and in this manual are explained
in Table A.
Table A Symbols
Symbol Description Symbol Indicator Lights
Battery
HI-V
High Voltage Indicator
>30 V indicator is on
Cautionary or important
information in manual
NCV
Non-Contact indicator
Danger- Risk of electrical
shock
Continuity indicator
Double Insulation- Protection
Class II
CP
Clean power indicator
On if power is Clean
Off if power has > 5% THD
CAT III
IEC Over-voltage Category III
Form number TM61700-1-2-4 Rev 4 September 2004
To Next Page
Loading...
Need help?
General
