IDEAL Esprit eco 24 - Page 14

14
INSTALLATION
Esprit eco - Installation and Servicing
HARDWARE PACK CONTENTS
Gas Valve Pack
1. Gas Cock
2. Valve - DHW
3. Valve - Return
4. Valve - Flow
5. Pipe - DHW Outlet
6. Nut - G 1/2"
7. Washer - Gas
8. Washer - DHW
9. Washer - CH
10. Screw
11. Wall Plug
12. Turret Clamp Screw
Fixings Pack
3
4
7
10
11
8
9
2
6
5
1
12
6 UNPACKING
The boiler is supplied fully assembled in Pack A. A telescopic or non-telescopic ue assembly for rear or side ue outlet in
Pack B is suppled as a separate order.
Unpack and check the contents.
Pack A Contents
A Boiler
B Hardware Bag
C Wall Mounting Plate
D These Installation/Users Instructions
E Wall Mounting Template
(located on internal protective packaging)
F Turret Clamp
G Boiler Guarantee & Registration Pack
C
D
F
B
E
G
Boiler Guarantee
A
IMPORTANT. To unpack the boiler:
1. Remove outer sleeve
2. Remove top end support
3. Stand up the boiler with aid of base tray
4. Remove base tray ensuring bottom end
support is still in place.
INSTALLATION