IDEAL Esprit eco 24 - Page 15

15
INSTALLATION
Esprit eco - Installation and Servicing
A
D
C
B
C
D
A
E
B
8 FRONT PANEL REMOVAL
1. Lift the lower front panel access panel.
2. Unscrew the two xing screws, close the access panel to
retain the screws and hinge the lower front panel down into
the service position.
3. Remove the two upper front panel xing screws, lift the panel
and remove.
2
1
3
Pack B Contents Telescopic
A Telescopic Flue Terminal
B Flue Turret
C Rubber Terminal Wall Seal
D Screw
E Sealing Tape
Pack B Contents Non-Telescopic
A Flue Terminal
B Flue Turret
C Rubber Terminal Wall Seal
D Cutting Aid
Note. This ue system incorporates a removable ue outlet nose that utilises a push t location system. This enables the
installation of deector, high level or balcony outlet ue kits without the removal of the whole ‘B’ pack terminal. The appliance
must not be operated without the desired outlet nose correctly tted in place.
Note. Location dimples must be aligned with terminal mounting frame.
7 UNPACKING CONT’D
INSTALLATION