IDEC SmartRelay installation and wiring
24 IDEC SmartRelay Manual
2.1.3 Compatibility
The Text Display module can only be used with equipment
series FL1E.
You cannot edit message texts from the IDEC SmartRelay
base mo
dule that contain any of the following parameters:
•Par
•Time
•Date
•EnTime
•EnDate
You can only edit such message texts from WindLGC.
When using FL1D-K2B2 and FL1D-K2BM2 with equipment
ser
ies FL1
C or FL1D, the functions are limited to the ones
available on this equipment. You cannot use the module with
equipment series FL1B or earlier.
All other expansion modules are completely c
ompatible with
the basic modules of equipment series FL1B, FL1C, FL1D,
and FL1E.
To Next Page
Loading...
Need help?
General
