Need help?Do you have a question about the IDEC FL1E-H12RCE and is the answer not in the manual?
General| Series | FL1E |
|---|---|
| Supply Voltage | 24 VDC |
| Number of Relay Outputs | 2 |
| Output Type | Relay |
| Mounting Type | Bracket |
| Color | Black |
| Detection Height | 120 mm |
| Number of Beams | 12 |
| Resolution | 10 mm |
| Response Time | 10 ms |
| Operating Temperature | -10 to +55 °C |
| Connection | M12 Connector |
| Type | Light Curtain |
Identifies the specific product series covered by the manual.
Indicates severe injury or death if precautions are not taken.
Indicates potential severe injury or death if precautions are not taken.
Warns about risks of using battery/combined cartridges in hazardous locations.
To Next Page
