Revision History
Date Manual No. Description
November, 2008 B-1090(0)
First print
December, 2008 B-1090(1)
Sensor connections for IDEC SmartRelay:
FL1E-H12RCA / FL1E-B12RCA /
FL1E-H12RCE / FL1E-B12RCE / FL1E-H12SND
February, 2009 B-1090(2)
• Compatibility (FL1C-PM3 memory cartridge in FL1E)
• Compatibility (FL1E-PM4 memory cartridge in older
IDEC SmartRelay modules)
July, 2009 B-1090(3) Deleting the circuit program and password “Note”
September, 2009 B-1090(4)
• 1. The analog output module (FL1D-K2BM2) structure
• 1. How to identify the IDEC SmartRelay
(Analog output module)
• 2.1.2 Setup with different voltage classes
• 2.1.3 Compatibility (FL1D-K2BM2)
• 2.2.3 Mounting the Text Display
• 2.3.4 Connecting outputs, Output Internal Circuit
(FL1D-K2BM2)
• 3.6.5 Password
• 3.6.5 Changing IDEC SmartRelay from RUN to STOP
mode from the Text Display
• 4.4.20 Analog amplifier (Analog output)
• 6. Compatibility (FL1C-PM3 memory cartridge in FL1E)
• 6. Compatibility (FL1E-PM4 memory cartridge in older
IDEC SmartRelay modules)
• A.1 General technical data (Degree of protection)
• A.11 Technical data: FL1D-K2BM2
• E: Type Number (FL1D-K2BM2)
July, 2010 B-1090(5)
• 1. How to identify the IDEC SmartRelay
(Base module)
• 4.4.11 Seven-day time switch
• 4.4.12 Twelve-month time switch
• A.4 Technical data: FL1E-H12SND
(Backup of the real-time clock at 25°C,
Accuracy of the real-time clock)
• E: Type Number (FL1E-H12SND)
December, 2011 B-1090(6)
• 7. IDEC SmartRelay software
Adding Windows 7 to the supporting OS.
• Deleting the description for LONWORKS.
To Next Page
Loading...
