IDEC SmartRelay Manual 109
4
IDEC SmartRelay functions
Organization
IDEC SmartRelay provides you with various elements in
program
ming mode, which are organized in the following
lists:
• Co: Co
nnecto
r list (Connector)
(see Chapter 4.1)
• GF: List of the basic functions AND, OR, ...
(refer to Chapter 4.
2)
• SF: List of the special functions
(refer to Chapter 4.
4)
• BN: List of re
usable blocks configured in the circuit
program
List contents
All lists show the elements available in IDEC SmartRelay
Usually, this includes all co
nnectors, basic functions, and
special functions. The BN list shows all the blocks that you
have created in IDEC SmartRelay.
If not all is shown
IDEC SmartRelay does no
t show all elem
ents if:
• No further blocks may be added.
This is either an indication of insufficient memory space
or that th
e maximum number of blocks has been reached.
• A specific block’s memory space requirement would
exceed the space available in IDEC SmartRelay
See Chapter 3.7.