>Stop
Set Param
Set
Prg Name
>Stop/>Yes
>Memory?
Show available memory space (Chapter 3.8)
>AQ
>Edit Name
>Edit Prg
Editing the program (Chapter 3.7 cont.)
>Clear Prg
>Password
>Msg Config
>Edit.. Password?
>Program
Card
Setup
Start
Programming menu (ESC / >Stop >Program)
Menu overview
See “Main menu”
Mo 09:00
2008-05-26
See “Start menu“
Press ESC
No Program
Circuit program is
busy (RUN)
No Program
Parameter setting (Chapter 5.1.1 cont.)
Default values setting (Chapter 5.2 cont.)
Display of the program name
>Yes
Parameter assignment menu
Main menu (ESC / >Stop)
See “Programming menu”
>Edit
..
> –>Card
>Clock
See “Transfer menu”
See “Setup menu”
See “Start menu“
Mo 09:00
2008-05-26
Editing the program name (Chapter 3.7.4)
Selecting analog output values and type
(Chapters 3.7.11 and 3.7.12)
Deleting the program (Chapter 3.7.13)
Input/change of password (Chapter 3.7.5)
Configure global parameters for message texts (Chapter 4.4.23)
>Program
Card
Setup
Start
IDEC SmartRelay Manual 329
D
IDEC SmartRelay menu structure
D.1 IDEC SmartRelay base module
To Next Page
Loading...
Need help?
General
