Preface
iv IDEC SmartRelay Manual
Valid range of this manual
The manual applies to devices of series FL1E.
New features of the FL1E IDEC SmartRelay device series
• The Text Display provides an additional display device for
me
ssages, a
nd contains four cursor keys and four functions
keys that can be used in the circuit program.
• An additional password protection function is available in
the
Te
xt Display (version 4 or later) and can only be enabled
when the Text Display is used together with IDEC
SmartRelay Base modules (version 4 or later).
• The new IDEC SmartRelay Battery cartridge and the
IDEC Smar
tRel
ay Combined Memory/Battery cartridge
provide up to two years of backup time for the real-time
clock. The new IDEC SmartRelay Memory cartridge and
the Combined Memory/Battery cartridge provide 32
Kbytes memory space.
• Additional optional analog inputs and fast digital inputs are
available on
some of the F
L1E IDEC SmartRelay base
modules.
• FL1E IDEC SmartRelay configuration menus can be
d
isp
layed in ten supported languages. You have a
configuration choice to specify the language for IDEC
SmartRelay menus.
• New instruction blocks are available: Pulse Width Modulator
(PWM), Ana
lo
g Math, and Analog Math Error Detection.
• Message texts can tick on and off the display; can include
bar
graphs, can switch between two character sets, and
can be displayed on either the IDEC SmartRelay Display,
the Text Display, or both. Full editing capabilities are
available from WindLGC; editing from the IDEC
SmartRelay base module is limited to simple text. See
section 2.1.3 for further details.
• USB PC cable between a PC and IDEC SmartRelay base
mo
dule is ava
ilable as an option.
• You can now have up to 200 program blocks in your
circuit prog
ram.
To Next Page
Loading...
Need help?
General
