2
Table of Contents
1. System Configurations
2. Operating Procedures
1-1 Required hardware and application software
1-2 System configurations
2-1 Program screen
2-2 Reading barcode data
2-3 Registering scanned barcode data
2-4 Displaying “OK” or “NG” when reading barcodes
2-5 Clearing the registered barcode data
…………….…………………
…………………………………………………….
3
3
4
5
5
6
3. User Communication Settings
3-1 Setting the Communication Interface settings
3-2 Setting the User Communication settings
3-3 Protocol of barcode reader
3-4 Device used with the barcode reader protocol
7
9
10
11
4. Description of the Program
4-1 Device allocations of the program screen
4-2 Displaying the barcode data
4-3 Creating the STORE button for the barcode data
4-4 Creating the CLEAR DATA button for the barcode data
4-5 Judging the match or mismatch of barcode data
4-6 Barcode comparison settings
4-7 Judging the barcode data matching
………………………………..
………………………………………………
………………………
………………….
…………………………
…………………………………………….
……………………………………..
12
13
14
15
16
16
18
5. Advanced Program for Barcode Comparison
………………………………………………………………..
…………………
………………………..………………
………………………….
……………….……………
…………………………………….
………………………………….……..
…………………
………………………………………
19
20
20
20
21
21
22
23
24
6
……………………………………….….…………………
…………………………………………………….
………………………………………..
…………………………
…………………………………….
……………………………..
………………………………….
……………………………………………….
………………………….
5-1 Program screens
5-2 Entering the barcode number for registration and verification
5-3 Registering the scanned barcode data
5-4 Calling the barcode for registration and verification
5-5 Displaying “OK” or “NG” upon reading barcodes
5-6 Modifying the barcode data for verification
5-7 Device setting in the sample program
5-8 Storage location of the registration number and barcode data
5-9 Using the results of barcode detections
To Next Page
Loading...