MSO Fingerprint scanners Installation Guide
Error! Use the Home tab to apply Titre 1 to the text that you want to appear here.
This document and the information therein are the property of IDEMIA. They must not be copied
or communicated to a third party without the prior authorization of IDEMIA
6.2.3 Smart Card Reader characteristics
MSO1350 device is equipped with a smartcard reader that complies with:
ISO 7816 1-2-3
PC/SC protocol
CCID (over USB2) protocol
CPU-based cards with T=0 and/or T=1 protocol
ISO 7816 Class A, B and C smartcards (5V, 3V and 1.8V).
Card Reader characteristics:
ID1 Cards
EMV Level 1
Insertion Cycles : at least 100,000
Smart Detections : Smart Card detection Movement detection with auto power-off
Protections : Short circuit protection in all pins
Pin Handling : 8 Pin Handling, C4 / C8 supported
To Next Page
Loading...