Idexx Filta-Max xpress User Manual

6
Filta-Max xpress Operator’s Guide
Warnings
Warnings are designated by an exclamation mark inside a triangle and are highlighted in bold.
Warnings are also displayed as labels on the Filta-Max xpress Pressure Elution Station at strategic
locations.
• Observe all warning labels.
• Never remove warning labels.
• Never operate a damaged or leaking unit.
• Always turn off the power and disconnect the power cord prior to performing any service or
routine maintenance.
• Never operate the Filta-Max xpress Pressure Elution Station with a damaged power cord.
When replacing the power cord, use only power cords with adequate rating.
• The Pressure Elution Station is designed with an electrical ground system. Never defeat any
part of the protective earthing.
• Do not attempt to disassemble the unit. Refer all service and repairs to a qualified service
technician.

Idexx Filta-Max xpress Specifications

General

Brand	Idexx
Model	Filta-Max xpress
Category	Laboratory Equipment
Language	English