Idis DR-2516P - General

Part 2 - Conguration
46
Set Camera Password
For IDIS protocol cameras that support changing and
nding the camera password, you must set the camera
password at the time of initial camera registration. A
mobile phone and email information are used to change
and nd the camera password.
1
Select the deivce from the list and click the Add
Camera button, then Set Password window will
appear.
Only the camera that does not set password of the
camera which supports the password setting function
is displayed.
2
Enter the password, mobile phone, and e-mail
address, and then select OK.
• If you do not authenticate your email address, you
may not be able to nd your password unless you
enter the correct information.
• FEN setup is required for authentication. For more
information on FEN setup refer to FEN on page
102.
• By selecting Apply to All Devices, you can apply
the same password, mobile phone and e-mail
information to cameras that require password
settings in the scan list.
• When you select multiple network devices from the
list and click the Add camera button, a window for
the network device will appear. Select Skip to skip
the authentication settings for the current network
device and to display the Authentication window of
the next network device.
3
When the password is set, the login window will
appear.
General
Enable/disable the covert view and rename cameras.
● Title: Edit the camera’s name.
● Use: Set the camera as Normal, Covert 1, or Covert 2.
Live images and video recordings from cameras that
have been set as Covert 1 or Covert 2 will not be
available to users who do not have covert camera
access. Setting a camera as Covert 1 hides its images
but does display OSD information about the camera.
Setting a camera as Covert 2 hides its images as well
as ODS information about the camera as if it has been
deactivated completely.
● MAC Address: Displays the camera MAC address.
● Password: Set the camera password.