iDPRT SP900 - Page 57

SP900 User Manual
57
• Chinese Mode
• Arabic Transform
• Vietnamese transform
 Cut setting
Enable or disable “Cut paper after the cover is closed” / “Cut paper when power on”.
Enable “Cut paper after the cover is closed”:
When the printer closes the cover, it will automatically cut the paper.
Disable “Cut paper after the cover is closed”:
The printer does not cut the paper automatically after closing the cover.
Enable “Cut paper when power on”:
The printer will automatically cut paper when it is powered on.
Disable “Cut paper when power on”:
The printer does not cut paper automatically after it is powered on.