IDS 816 User Manual

IDS816 User Manual 700-283-01H Issued January 2009
9
4.
4. 4.
4. The Keypad Buzzer
The Keypad BuzzerThe Keypad Buzzer
The Keypad Buzzer
[#] WITH any key from [0] to [3] for 1 second
The keypad includes a buzzer that is used for audible signalling and verification of certain keypad
functions. There are 4 possible volume settings: loud, medium, soft and click, loud being the default
setting. To program the keypad volume, use the following table:
Key Entry
Key EntryKey Entry
Key Entry Keypad Buzz
Keypad BuzzKeypad Buzz
Keypad Buzzer Options
er Optionser Options
er Options
[#] [3] Loud (Default setting)
[#] [2] Medium
[#] [1] Soft
[#] [0] Click
To change the volume (for this example to the “soft” setting) press the [#] and [1] key simultaneously for
1 second (long press). After a 1 second time lapse, the keypad will respond with a beep at the new
volume setting. This is a keypad specific setting, and applies to the keypad that this operation is
performed on.
All zones programmed as Chime or Buzz zones, will sound with a loud buzz regardless of the
keypad volume set above.
5.
5. 5.
5. Programmable Functions
Programmable FunctionsProgrammable Functions
Programmable Functions
Functions include:
 Quick Away Arm
 Quick Stay Arm
 Arm with Entry/Exit or Follower zones violated
 Stay Arm
 Stay Arm and Go
 Forced Arm
 Push to Arm
 Siren Sound on Arm/Disarm (single toot – arm / double toot – disarm)
 Panic Alarm
 Fire Alarm
 Medical Alarm
 Chime zones
 Buzz zones
 Zone Tamper
 Arm with Key-switch or Remote Control

IDS 816 Specifications

General

Brand	IDS
Model	816
Category	Keypad
Language	English