IDTECH NEO2 - Page 125

13.7 IDT_NEO2 Class Reference 115
Parameters
readerStatus Pointer that will return with the ICCReaderStatus results.
Returns
RETURN_CODE: Return codes listed as typedef enum in IDTCommon:RETURN_CODE. Values can be
parsed with device_getResponseCodeString:
ICCReaderStatus
*
readerStatus;
RETURN_CODE rt = [[IDT_Device sharedController] getICCReaderStatus:&readerStatus];
if(RETURN_CODE_DO_SUCCESS != rt){
NSLog(@"Fail");
}
else{
NSString
*
sta;
if(readerStatus->iccPower)
sta =@"[ICC Powered]";
else
sta = @"[ICC Power not Ready]";
if(readerStatus->cardSeated)
sta =[NSString stringWithFormat:@"%@,[Card Seated]", sta];
else
sta =[NSString stringWithFormat:@"%@,[Card not Seated]", sta];
13.7.2.72 - (RETURN_CODE) icc_powerOffICC: (NSString ∗∗) error
Power Off ICC
Powers down the ICC
Parameters
error Returns the error, if any
Returns
RETURN_CODE: Return codes listed as typedef enum in IDTCommon:RETURN_CODE.
If Success, empty If Failure, ASCII encoded data of error string
13.7.2.73 - (RETURN_CODE) icc_powerOnICC: (NSData ∗∗) response
Power On ICC
Power up the currently selected microprocessor card in the ICC reader
Parameters
response Response returned. If Success, ATR String. If Failure, ASCII encoded data of error string
Returns
RETURN_CODE: Return codes listed as typedef enum in IDTCommon:RETURN_CODE.
13.7.2.74 - (bool) isConnected
Check if device is connected
IDTech iOS SDK Guide for NEO2 #80152802-001