IDTECH NEO2 - Page 132

122 Class Documentation
13.9.1 Detailed Description
device AID File - 47 bytes
Used as parameter in setApplicationData: (IDTechEMV)
Used as return value of aidResponse in retrieveApplicationData: (IDTechEMV)
The documentation for this struct was generated from the following file:
• Source_iOS/IDTechEMV.h
13.10 IDTech_TerminalData Struct Reference
#include <IDTechEMV.h>
Public Attributes
• unsigned char terminalCountryCode [2]
Terminal’s location. Tag 9F1A {0x08,0x40}.
• unsigned char merchantCategoryCode [2]
Classifies the type of business being done by the mechant, represented according to ISO 8583:1993.
• unsigned char merchantID [15]
When concatenated with the Acquirer Identifer, uniquely identifies a given merchant.
• unsigned char terminalID [8]
Designates the unique location of a terminal at a merchant.
• unsigned char defaultTACDefault [5]
Default Terminal Action Code Denial. Tag DF13.
• unsigned char defaultTACDenial [5]
Default Terminal Action Code Denial. Tag DF14.
• unsigned char defaultTACOnline [5]
Default Terminal Action Code Denial. Tag DF15.
• unsigned char useDefaultTACDefault
Indicates if tacDefault value should be used as terminal default value.
• unsigned char useDefaultTACDenial
Indicates if tacDenial value should be used as terminal default value.
• unsigned char useDefaultTACOnline
Indicates if tacOnline value should be used as terminal default value.
• unsigned char terminalLocation [36]
Terminal Location tag 9F4E.
13.10.1 Detailed Description
device Terminal Configuration File - 45 bytes
Used as parameter in setTerminalData: (IDTechEMV)
Used as return value in setTerminalData: (IDTechEMV)
The documentation for this struct was generated from the following file:
• Source_iOS/IDTechEMV.h
#80152504-001 IDTech iOS SDK Guide for NEO2