What to do if HTF flag is set on IDTECH Card Reader?
The HTF flag in the IDTECH Card Reader must be cleared by software once it's set. Otherwise, this bit remains unchanged by any resets except for a Brown-Out Reset (BOR).
What to do if HBF flag is set on IDTECH Card Reader?
The HBF flag in the IDTECH Card Reader must be cleared by software once it's set. Otherwise, this bit remains unchanged by any resets except for a Brown-Out Reset (BOR).
What to do if LTF flag is set on IDTECH Card Reader?
The LTF flag in the IDTECH Card Reader must be cleared by software once it's set. Otherwise, this bit remains unchanged by any other resets except for a Brown-Out Reset (BOR).
General| Connectivity Technology | USB |
|---|---|
| PIN Pad | Yes |
| Smart Card Standard | ISO 7816 |
| Track Support | Track 1, Track 2, Track 3 |
| Encryption | AES-256 |
| Card Types Supported | Smart Card |
| Magnetic Stripe Standards | ISO 7811 |
| Supported Cards | Credit Card, Debit Card, Gift Card |
| Operating System Compatibility | Windows, Linux |
To Next Page
