Need help?Do you have a question about the IDTECH MINIMAG and is the answer not in the manual?
Describes the MiniMag reader's capabilities, including track reading and data editing features.
Details how to connect the MiniMag reader between the host computer and keyboard using a Y adapter cable.
Outlines the factory default settings for the MiniMag and requirements for modification, including terminal compatibility.
Provides step-by-step instructions for entering setup mode and programming configuration settings via keystroke commands.
Defines basic operating parameters such as terminal type, beep volume, and intercharacter delay.
Controls MSR reading enablement and selects the direction for card swiping and data decoding.
Allows selection of which magnetic stripe tracks (1, 2, or 3) will be read and decoded.
Configures the sending of start/end sentinels and selection of Track 2 account number output.
Describes data editing capabilities including rearranging data, inserting strings, duplicating fields, and selecting output fields.
Explains how to divide data into fields, edit them individually, and define new fields for specific functions.
Details the data editing formula concept, its application process, and supported data formats.
Lists commands for enabling/disabling data editing and defining added fields for output.
Introduces five search methods (Length, String, Before, Between, After) for custom data format analysis.
Provides the detailed syntax and parameters for configuring data editing search commands.
Command to output edited field data according to customer-defined order and specified formats.
Step-by-step guide for correctly swiping a card and interpreting the reader's LED and beep indicators for read status.
Basic diagnostic steps to identify common problems such as power, cabling, incorrect configuration, or poor magnetic stripe quality.
Troubleshooting tips for issues related to the keyboard interface, including cable compatibility and data transmission speed.
Details the data structure for ISO credit cards across magnetic stripe Track 1 and Track 2.
Details the data structure for California Driver's Licenses across magnetic stripe Track 1 and Track 2.
Details the data structure for magnetic stripe Track 3, including various fields and their lengths.
Details the data structure for AAMVA Driver's Licenses across magnetic stripe Track 1, Track 2, and Track 3.
Provides step-by-step instructions for installing the ID TECH USB Reader Setup utility from a diskette.
Guides users on operating the ID TECH Reader Setup utility to configure the reader via USB interface.
General| Type | Magnetic Stripe Reader |
|---|---|
| Connectivity Technology | Wired |
| Power Supply | USB powered |
| Color | Black |
| Operating System Compatibility | Windows |
To Next Page
