Need help?Do you have a question about the IDTECH VP3600 and is the answer not in the manual?
Details capabilities for reading magnetic stripe cards.
Outlines device support for ICC (chip) card transactions.
Lists supported contactless payment technologies and standards.
Describes the location and function of the Secure Access Module (SAM) slot.
Provides guidance on charging the device's lithium-ion battery.
Explains how to charge the VP3600 using a USB cable.
Notes the device's automatic 24-hour reboot requirement for PCI compliance.
Explains how the LCD displays battery status during charging.
Describes how the LCD indicates battery status and low power warnings.
Details LCD messages for transaction status and card read outcomes.
Guides users through connecting the VP3600 to Android and iOS devices via Bluetooth.
Outlines prerequisites for pairing, including demo app download and parameter setup.
Step-by-step instructions for pairing with Android devices via Bluetooth Low Energy.
Details how to test the Bluetooth connection using the NEO 2 Demo app on Android.
Instructions for connecting the VP3600 to iOS devices, noting no explicit pairing is needed.
Steps to test the Bluetooth connection on iOS using the NEO 2 Demo app.
Introduces the demo application included with the Universal SDK for testing and development.
Explains how to use the Universal SDK Demo App on a Windows host.
Highlights critical safety cautions regarding battery charging and proximity to radio transmitters.
General| MSR Track Support | Tracks 1, 2, and 3 |
|---|---|
| Interface | USB |
| Card Types Supported | Magnetic Stripe Cards |
| Encryption | AES |
| Certifications | PCI PTS |
| Compatibility | Windows |
To Next Page