Need help?Do you have a question about the IEI Technology IMB-9454G-R20 and is the answer not in the manual?
General| Form Factor | ATX |
|---|---|
| Processor Socket | LGA 775 |
| Audio | Realtek ALC662 |
| Parallel Port | 1 |
| Power Supply | ATX |
| Memory Slots | 4 |
| Expansion Slots | 1 x PCI |
| LAN | 1 x Gigabit Ethernet |
| Graphics | Integrated Intel Graphics |
| Serial Ports | 2 x RS-232 |
| Operating Temperature | 0°C ~ 60°C |
General overview of the IMB-9454G motherboard, its features, and benefits.
Provides a visual layout and description of the motherboard's key components and connectors.
Specifies the physical dimensions of the IMB-9454G motherboard and its interface panel.
Lists the Intel CPUs supported by the IMB-9454G, including specific models and features.
Describes the Northbridge (Intel 945G) and Southbridge (ICH7) chipsets used on the motherboard.
Details the integrated graphics capabilities of the Intel 945G northbridge chipset.
Outlines the DDRII memory support, including number of sockets and maximum capacity.
Covers support for SATA, IDE, and FDD drive interfaces on the motherboard.
Describes the USB 2.0 interfaces supported, including internal and external ports.
Details the integrated Realtek ALC655 audio codec and its features.
Presents power consumption parameters for the IMB-9454G under specific conditions.
Lists the components included with the IMB-9454G motherboard package.
Introduces the on-board peripheral connectors and their locations on the motherboard.
Provides detailed descriptions of various internal connectors on the motherboard.
Introduces the external connectors located on the motherboard's rear panel.
Provides essential precautions to prevent electrostatic discharge (ESD) damage during handling.
Offers important notices and considerations that must be read before installing the motherboard.
Outlines specific precautions to take when unpacking the motherboard to prevent damage.
General guidelines for installing the IMB-9454G motherboard into a chassis.
Step-by-step instructions for installing a CPU into the LGA775 socket.
Guides on purchasing and installing DDR2 SDRAM DIMM modules into the motherboard sockets.
Explains how to connect peripheral devices using the provided cables.
Explains the function and location of on-board jumpers on the motherboard.
Describes the function and connection of various rear panel connectors.
Introduces the AMI BIOS setup utility and how to access it.
Explains the basic navigation and key functions within the BIOS setup utility.
Describes the Main BIOS menu, which provides an overview of system information.
Covers advanced system settings, including CPU, IDE, Floppy, Super IO, and ACPI configurations.
Allows configuration of system boot options, including device priority and boot sequences.
Allows setting supervisor and user passwords for system security.
Provides access to Northbridge and Southbridge chipset configuration settings.
Options for saving changes, discarding them, or loading default BIOS values.
Lists the software drivers provided on the utility CD for the motherboard.
Step-by-step guide for installing the Intel Chipset driver.
Instructions for installing the Intel Graphics Media Accelerator VGA driver.
Guide for installing the Broadcom GbE LAN driver.
Instructions for installing the Realtek ALC655 audio driver.
Steps for installing the Intel Matrix Storage Manager driver.
A comprehensive list of all BIOS configuration options with corresponding page numbers.
Explains the purpose and control of the Watchdog Timer for system recovery.
Table listing Input/Output (IO) address ranges and their corresponding controllers.
Table mapping the first megabyte of memory addresses to system components.
Table showing Interrupt Request (IRQ) assignments for various system devices.
Table listing Direct Memory Access (DMA) channel assignments and their functions.
Introduction to the on-board Realtek ALC655 audio CODEC.
Guides on accessing and configuring sound effects using the Sound Effects Manager.
To Next Page