IFM Electronic AL1900 - Profinet

34
ifm Device Manual IO-Link Master with PROFINET interface CabinetLine 8 Ports IP 20 (AL1900) 05 / 2018
Configuration PROFINET
>
8.2 PROFINET
Install GSD file ........................................................................................................................................35
Add the IO-Link master to the PROFINET network ...............................................................................36
Configure access rights ..........................................................................................................................38
Configure IO-Link ports ..........................................................................................................................39
Configure the PROFINET port................................................................................................................40
Configure IO-Link devices ......................................................................................................................40
Read and write data cyclically ................................................................................................................41
PROFINET: Read & write device information ........................................................................................41
PROFINET: Programmers' notes ...........................................................................................................42
22758
On the field bus side, the device can be configured with the following options:
 PROFINET projection software STEP 7 (version 5.5 SP 4 or higher)
 PROFINET projection software TIA portal
Further information about operation and functions of the PROFINET parameter setting
software:
► Use the help function of the PROFINET projection software!