Contents
1. Function and features page 3
2. Programming page 3
3. Mounting page 4
4. Electrical connection page 4
5. Maintenance, repair and disposal page 7
6. Approvals/standards page 7
Technical data (data sheets 1...5)
Dimensions, mechanics, electronics page 8
Operating status (status LED) page 9
Test standards and regulations page 9
Characteristics of the inputs/outputs page 10
Wiring page 12
1. Function and features12
The freely programmable controllers of the "ClassicController R 360" series are
rated for use under difficult conditions (e.g. extended temperature range, strong
vibration, intensive EMC interference).
They are thus suited for direct mounting into machines in mobile and rugged
applications. Due to their specification the inputs and outputs are especially rated
for this use. Integrated hardware and software functions (operating system) offer
high protection of the machine.
The controllers can be used as CANopen master.
The controllers "ClassicController R 360" are not approved for safety-
relevant tasks in the field of safety of persons.
2. Programming
The application software can be easily created by the user with the ifm
programming system CODESYS according to IEC 61131-3.
In addition to the programming system the complete system manual is required
to program the controller.
If this manual is not available, please contact one of the ifm branch offices
overleaf for your free copy. The system manual (pdf format) can also be
downloaded from the web (www.ifm.com).
➔ System manual R 360; English (order no. EC2041)
➔ Data sheet direct ➔ CR0505 ➔ Additional data
The user is responsible for the safe functioning of the application programs
which he creates himself. If necessary, he must additionally obtain an
approval according to the corresponding national regulations by the
corresponding testing and supervisory organisations.
Internet
Request
ENGLISH
CLASSICCONTROLLER CR0505
PAGE 3
To Next Page
Loading...
