6
Operating mode 2
Description Operating mode on delivery�
For exceptions, see note at the beginning of this chapter�
Application Standard applications�
IODD designation Example PN2094 Factory setting / (CMPT = 2):
At www�ifm�com in the download area of the corresponding article�
Operating mode 3
Description High IO-Link process value and parameter resolution
(device-specific: see IODD suitable for the operating mode)�
The menu items [ou1] and [ou2] are extended by the setting
option [OFF] (→ 9.4.1)�
IO-Link standard command "Flash" is available (→ 4.5.2)�
This operating mode is available as of device status BA�
For the device status see the labelling on the device�
BA xxxx
PNxxxx
Application Improved controllability via IO-Link�
Highly granular setting of set and reset points�
IODD designation Example PN2094 Status_B High Resolution / (CMPT = 3):
Example PN2012 Status_B
At www�ifm�com in the download area of the corresponding
article�
Manual selection of the operating mode see (→ 9.1),
selection of the operating mode via IO-Link interface see → Additional
document: Selection of the operating mode at www�ifm�com�
To Next Page
Loading...
