Need help?Do you have a question about the IFM CR7132 and is the answer not in the manual?
General| Brand | IFM |
|---|---|
| Model | CR7132 |
| Category | Controller |
| Language | English |
Details requirements for connecting the device to a mobile on-board system.
Details how to fix the controller using M5 screws and the required tightening torque.
Instructions for connecting wires, emphasizing pin layout and connecting supply/GND terminals.
Advises noting the device label for correct assignment of connectors.
Explains the importance of connecting the housing to vehicle ground for interference protection.
Details the process of programming the controller using a USB interface.
Guides on installing USB drivers to provide a virtual COM port on the PC.
Explains how to install and define the virtual COM port in Windows device manager.
Presents detailed mechanical and electrical specifications of the device.
Provides a detailed wiring diagram for the Standard (St) side connections.
Provides a detailed wiring diagram for the Extended (Ex) side connections.
To Next Page
