IFM DV2120 - Technical Data; IO-Link Device Specifications

15
UK
10 Technical data
DV2120 DV2121 DV2130 DV2131
Operating voltage DC [V] 18���30
Nominal voltage DC [V] 24
Current consumption [mA] ≤ 90 RMS (400 mA for 50 ms)
Input current on the IO-Link pin [mA] type. 6.6 (24 V DC, high signal)
Max� buzzer volume [dB] - 90
Feedback button - ● - ●
Protection rating IP 67 IP 65
Degree of soiling 2
Ambient temperature [°C] -25…50
Storage temperature [°C] -40…75
Max� permissible relative air humidity [%] 90
Maximum operating altitude [m] 4000 above sea level
IO-Link ● ● ● ●
Connectors M12 connector, 5 poles
Weight 85 100
10.1 IO-Link device
Transmission type COM2 /38.4 kBaud)
IO-Link revision 1�1
SDCI standard IEC 61131-9
IO-Link device ID
DV2120, DV2121 1054 d / 00 04 1E h
DV2130 1085 d / 00 04 3D h
DV2131 1176 d / 00 04 98 h
SIO mode yes
Input load current at input C/Q to V0
(ILL)
[mA] < 250
Required master port type A
Min� process cycle time [ms] 2�3