Need help?Do you have a question about the IFM O2D50 Series and is the answer not in the manual?
General| Brand | IFM |
|---|---|
| Model | O2D50 Series |
| Category | Accessories |
| Language | English |
Explains the meaning of various symbols used throughout the manual.
Details the types of warnings and their significance for user safety.
Describes safety markings physically present on the device itself.
Provides essential legal notices and copyright details for the document.
Information regarding the use of open-source software components.
Discusses risks associated with light emission and eye safety.
Specific photobiological safety guidelines for O2D500 and O2D502 models.
Specific photobiological safety guidelines for the O2D504 model.
Specific photobiological safety guidelines for the O2D52x model.
Defines the intended applications and operating conditions for the device.
Details how to access and use the device's web interface.
Explains various ways to initiate image capture externally.
Describes the internal debouncing feature for trigger signals.
Explains the configuration and standard settings for switching outputs.
Describes how switching inputs control device functions.
Details switching applications using static input signals.
Specifics and features of internal illumination for O2D50x models.
Specifics and features of internal illumination for O2D52x models.
Provides guidelines for physically installing the unit.
Describes the procedure for mounting using a clamp accessory.
Details mounting the unit with a dome illumination accessory.
Details the electrical pin configuration and assignments.
Explains how to configure PNP or NPN output logic.
Illustrates a typical wiring setup for the device.
How to connect and use external illumination units with the device.
Explains the meaning of device LEDs and signal indicators.
How to use the multi-function key for optical focus adjustment.
Options for configuring or locking the multi-function key.
Details the device's mechanism for managing overheating.
Step-by-step guide for replacing the unit and transferring data.
To Next Page
