Need help?Do you have a question about the IFM O1D300 and is the answer not in the manual?
General| Product Type | Photoelectric Sensor |
|---|---|
| Model | O1D300 |
| Manufacturer | IFM |
| Operating voltage | 10-30 VDC |
| Light source | LED |
| Interface | PNP |
Describes how the output switches based on measured level thresholds.
Explains the hysteresis function for stable output switching.
Details the window function for monitoring a defined acceptable range.
Describes the analogue output signals proportional to the measured distance.
Explains the current output (4-20 mA) configuration and scaling.
Explains the voltage output (0-10 V) configuration and scaling.
Specifies environmental and mounting conditions for proper installation.
Recommendations for optimal sensor placement and distance considerations.
Diagram illustrating the hierarchical structure of the device's menu system.
Explanation of settings within the main menu, including output configuration.
Description of advanced settings and parameters available.
Covers the general process of setting device parameters.
Crucial step to set the reference level before the unit is operational.
Describes the different operating states of the unit.
The normal operating mode where the unit monitors and generates outputs.
To Next Page
