IFM O1D300 - Operating and Display Elements

15
UK
7 Operating and display elements
1: 4 x LED yellow
(two not connected)
Indication of the switching status; lit, if the corresponding
output is switched�
2: 4 x LED green Lighting LED = power and set display unit (cm, m, inch)�
3: 4-digit alphanumeric
display
Indication of the measured distance, the parameters and
parameter values�
4: Programming button
[MODE/ENTER]
Selection of the parameters and acknowledgement of the
parameter values
5: Programming button
[SET]
Setting of the parameter values (hold down to scroll; press
briefly to increment)�