IFM PI2898 - Page 3

3
UK
9.4.2 Set output status in fault condition ......................................................24
9.4.3 Set delay for the switching outputs .....................................................25
9.4.4 Set output logic for the switching outputs ...........................................25
9.4.5 Set damping for the switching signal ..................................................25
9.4.6 Set damping for the analogue signal ..................................................25
9.4.7 Calibrate curve of measured values ...................................................25
9.5 Service functions .........................................................................................26
9.5.1 Read min/max values for the system pressure ..................................26
9.5.2 Reset all parameters to factory setting ...............................................26
9.6 Simulation function ......................................................................................26
9.6.1 Open menu level 3 (simulation) .......................................................... 26
9.6.2 Set simulation value ...........................................................................27
9.6.3 Set time for simulation ........................................................................27
9.6.4 Start simulation ................................................................................... 27
10 Operation .........................................................................................................28
10.1 Read the set parameters ...........................................................................28
10.2 Change the display in the Run mode .......................................................28
10.3 Self-diagnosis / error indications ...............................................................28
10.4 Setting ranges ...........................................................................................31
11 Factory setting .................................................................................................33