iGenix IG9750 - Cleaning & Maintenance; Fuse Replacement

9
CLEANING & MAINTENANCE
The fan requires little maintenance. Do not try to x it by yourself. Refer it to qualied service
personnel if service is needed.
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure sufcient air supply, the honeycomb lter and dust lter should be cleaned regularly.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface.
Do not use any of the following as a cleaner: gasoline, thinner.
5. Do not allow water or any other liquid into the motor housing or interior parts.
Fuse Replacement (Class II)
Remove the fuse cover with a small at head screw
driver. Take out the fuse and replace with a new fuse of
the same Amp. Replace the fuse cover and push back
into place.
Fuse Cover
MAINS PLUG FUSE REPLACEMENT