What to do if iGenix Air Conditioner runs without cooling?
If your iGenix Air Conditioner isn't cooling in Air Conditioning mode, try these steps: Close any open doors or windows. Remove any appliances that generate heat from the room. Check and clean the air filter if it's dirty. Make sure air outlets or inlets aren't blocked. Ensure the set temperature isn't too high. Verify the room size is appropriate for the unit's specifications.
Why does my iGenix IG9919 run for a short time then switch off?
If your iGenix Air Conditioner runs for a short time and then shuts off, try the following: Lower the set temperature. Check for any bends or blockages in the air exhaust hose and remove them. Ensure the Timer function is not activated.
Why is my iGenix Air Conditioner leaking water?
If water is leaking from your iGenix Air Conditioner, drain the water tank. Also, check that the rubber caps are securely fitted to the drainage points and ensure the unit is placed on a flat, even surface.
How to fix iGenix IG9919 Air Conditioner that will not switch on?
If your iGenix Air Conditioner won't switch on, check the trip switch or fuse. Wait three minutes and try starting it again, as a protective device may be preventing operation. Verify the plug is correctly connected to the mains socket and check the batteries in the remote control.
How to stop iGenix Air Conditioner from creating an unpleasant smell?
To address an unpleasant smell from your iGenix Air Conditioner, clean the air filter.
Covers essential safety rules for appliance use, including electrical safety, handling, placement, and user restrictions.
Details technical specifications for IG9919 and IG9922 models, including capacity, power, dimensions, and features.
Identifies and labels the front and back components of the appliance and lists accessory parts.
Step-by-step instructions with diagrams on how to attach and connect the exhaust hose assembly to the unit.
Guides on optimal placement for air circulation and how to use the window slider kit for exhaust hose installation.
Details the assembly process for the window slider kit, including panel fitting and securing for a gap-free installation.
Explains the functions of the appliance's control panel buttons and the remote control's buttons.
Instructions for battery replacement, proper operation, and how to activate the Cool mode on the appliance.
Details how to set and operate the Heat and Fan modes, including temperature settings and fan speeds.
Explains Dry and Sleep modes, their functions, and how to switch between Celsius and Fahrenheit temperature units.
Instructions for programming the timer for start-up/shut-down and recommendations for optimal appliance performance.
Explains the procedures for manually draining the water tank and setting up continuous drainage via a hose.
Provides guidance on cleaning the appliance's exterior cabinet and maintaining the air filters for efficient operation.
Lists common issues like the unit not switching on, running briefly, or leaking, with corresponding troubleshooting steps.
Explains the meaning of error codes like 'LE', 'PF', and 'FE' and provides solutions or recommended actions for each.
Step-by-step instructions on how to safely replace the fuse in the appliance's mains plug.
Information on the proper disposal of the appliance according to WEEE regulations for environmental protection.
Details the product warranty period, conditions for coverage, and how to register for extended warranty.
Encourages customers to register their product within 30 days for a FREE 2-year warranty against defects.
General| Brand | iGenix |
|---|---|
| Model | IG9919 |
| Category | Air Conditioner |
| Language | English |
To Next Page
