Your Eclipse Pro is designed to be used regularly. As with most oor care devices, regular use may cause build-up around brushes, in debris compartments and
near lters. We recommend performing regular maintenance, as outlined in the following pages, to keep your Autovac Eclipse Pro running at optimal
performance.
1: Pinch the left and right tabs on the main brush cover. Lift and remove the cover.
2: Remove the main brush and clean with the included cleaning tool as seen in the gure below.
3: Replace the main brush and snap the cover back into place.
NOTE: It is recommended to replace the main brush every 6-12 months depending on use.
Main Brush Cover
Main Brush
MAINTENANCE SCHEDULE
PART
Main Brush Once a month Replace every 6-12 months
Side Brushes Once a month Replace every 6-12 months
HEPA Filter Every 2 Weeks Replace every 3 months
Main Filter Every 2 Weeks Replace twice a year.
CARE FREQUENCY REPLACEMENT FREQUENCY
15
MAIN BRUSH MAINTENANCE