Why my iPod does not dock properly in iHome Docking Station?
If your iPod isn't docking properly with your iHome Docking Station, it could be due to using the wrong or no iPod insert. Ensure you are using the correct dock insert for your iPod model. Also, remove your iPod from the dock and check both the connectors in the dock and on your iPod for any obstructions. Then, try reseating it in the dock.
What to do if my iHome Docking Station doesn't respond?
If your iHome Docking Station isn't responding, first ensure the AC adapter is properly plugged into both a functioning wall outlet and the power supply jack on the back of the unit. To verify the outlet is working, plug another device into it.
Why doesn't my iPod dock properly with my iHome Docking Station?
If your iPod isn't docking correctly with your iHome Docking Station, ensure that you are using the correct dock insert for your iPod model. Also, remove the iPod and inspect both the connectors on the dock and the iPod for any obstructions. Then, reseat the iPod firmly in the dock.
What to do if iPod does not respond to iHome iH5 Docking Station?
If your iPod isn't responding to the iHome Docking Station, try these steps: * Remove your iPod from the dock, inspect the connectors on both the dock and your iPod for any obstructions, and then reseat it. * If you are using 1st or 2nd generation iPod, iPod Shuffle or other devices, iH5 cannot control it. * Make sure your iPod is working properly before docking it into the unit.
How to fix a flashing 'Battery Low' icon on my iHome iH5?
If the 'Battery Low' icon is constantly flashing on your iHome Docking Station, the batteries may be weak and need replacing with new ones. Also, double-check that the batteries are installed correctly, ensuring the polarity (+ and – ends) matches the diagram inside the battery compartment.
What to do if my iHome Docking Station iH5 does not turn on?
If your iHome Docking Station iH5 doesn't turn on, the AC adapter might not be correctly plugged into a working wall socket or into the power supply jack on the back of the unit. Ensure the AC adapter is plugged into a functioning wall socket and that the connector is properly inserted into the supply jack on the unit.
What to do if my iHome Docking Station iH5 doesn’t respond?
If your iHome Docking Station iH5 is plugged in but not responding, it might need a reset. To reset the unit: 1. Remove your iPod from the dock. 2. Unplug the unit from the power source. 3. Remove the backup batteries. 4. Wait one hour, and then resume use.
General| Brand | iHome |
|---|---|
| Model | iH5 |
| Category | Docking Station |
| Language | English |
To Next Page
