Draco tera
158 2020-02-26
For an efficient macro configuration the following context functions are
available:
➔ When clicking on the Macros tab, macros can be assigned to other
consoles by using the Assign Macros to ... function and can be
copied from other consoles by using the Copy Macros from ...
function.
➔ When clicking on the macro list, macros of the selected key can be
copied into the cache by using the Copy Key Macros function. You
can paste the macros from the cache into a key by using the Paste
Key Macros function and you can reset all macros of the selected
key by using the Reset Key Macros function.
Pos: 91 /806-IHSE/ Konfiguration /480_Konsolen- Einstellunge n/480-xx/Konkurr ierende Be dienung @ 9\mo d_1375170037 949_6.doc @ 79211 @ 3 @ 4
5.13.6 Shared Operation
This menu enables shared operation of a CPU Device by two or more
CON Devices. A CPU Device can be controlled by only one CON Device
at a time but can be taken over successively by other CON Devices.
Control of a CPU Unit by a CON Unit is relinquished after the expiration of
an inactivity timer associated with the controlling CON Device. The mouse
or keyboard may also be used to take control.
In order to allow a smooth and accurate function of the shared operation,
you should use identical mice and keyboards. They should be connected
to the same USB-HID ports of each CON Unit.
The alternative is using the USB-HID Ghosting (see Chapter 6.14, Page
233).
When taking over control within 10 s, any assigned USB 2.0 / 3.0
extenders, if available, will not be switched due to security and stability
aspects.
The shared operation will be deactivated between CON Devices with a
different priority as well as the Release Time.
To Next Page
Loading...
