Operation
2020-02-26 223
Pos: 131 /806-IHS E/Betrieb/Sch altmakros/480-x x @ 7\mod_1 32444939938 5_6.doc @ 56 882 @ 2 @ 1
6.9 Presets
Predefined macros to switch the matrix without loading a new
configuration can be created and activated in this menu.
You have the following option to access the menu:
➔ Select Control > Presets in the task area.
Menu Control – Presets
To create a new switch macro proceed as follows:
1. Open a new switch macro by pressing on the New symbol in the right
column of the working area.
You are asked if the existing connections should be taken over for the
new switch macro.
2. Set the desired switching operations in the corresponding columns
(Full Access, Video Only or Private Mode) by using a double click
on the appropriate selection box or use the function for a disconnect
(Disconnect CPU).
To Next Page
Loading...
