AmpliTube TONEX ONE
Parameters
24
Parameters
Main parameters
The main parameters are accessible using the 3 micro knobs and the main knob. These are:
• Volume (main knob)
Adjusts the preset volume.
It’s automatically assigned to the:
• Tone Model’s volume (when compressor is set to pre).
• Compressor’s make up gain (when compressor is set to post).
• Bass
Adjusts the level of low frequencies with a shelf EQ.
• Mid
Adjusts the level of mid frequencies with a bell EQ.
• Treble
Adjusts the level of high frequencies with a shelf EQ.
Alternative parameters
The alternative parameters are accessible by pressing the ALT button (the ALT led and micro knobs start
blinking) and rotating the 3 micro knobs and the main knob:
• Gain (main knob)
Adjusts the Tone Model’s input gain.
Use this parameter to saturate more or less your Tone Model.
• Noise-gate
Adjust the noise-gate threshold.
• Compressor
Adjusts the compressor’s threshold.
• Reverb
Adjusts the reverb’s mix.
To Next Page
Loading...
Need help?
General
