IKA C 1 - Measurement Procedure Phases (Continued); Phase 3 & 4: Oxygen Filling and Stabilization; Phase 5: Ignition and Main Test; Phase 6-9: Post-Test Procedures

22
• Phase 3:
Filling with oxygen
• Phase 7:
Venting, result is displayed
• Phase 6:
Post test
• Phase 8:
Cooling (if option under the main menu " Basic Settings
" cooling is enabled) and water emptying
NOTE:
With the “cooling“ option, the energy is absorbed (by the
combustion in the calorimeter entered).
Deactivation, the measuring time and the accuracy of the
calorimeter affecting (depending on the sample
throughput).
• Phase 5:
The system ignites and thereby starts the main test
INFO: An ongoing measurement can be stopped by selecting
“Cancel“ at any stage
• Phase 4:
Stabilizing the temperature and preliminary