EasyManua.ls Logo

IKA C 1 - Using a Scale for Weight Input

IKA C 1
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
Example: sample weight in the limit and initial weight of the
combustible crucible too high
Using a scale
About Settings " accessories can be selected using a scale.
If this option is selected, the displayed on the scale weight is
automatically transmitted to the selected weight input field.
Depending on type of balance this function may need to be be
activated on the scale or the Transfer button must be pressed.
This applies both to the initial sample weight of the sample and
the weight of the disposable crucible.
Permissible weight entries
In a non-permissible weight is the OK button inactive (grayed out)
and can not be selected..
Sample weight:
There are weights of 0.00001 g to 4.99999 g permitted!
From 2.5 g in addition the message appears that the sample
weight in the limit range is (initial mass in the limit).
Combustible crucible:
There are weights of 0.00001 g to 0.99999 g permitted!
Weights greater than 0.99999 g are not possible.
Confirm the selection with OK button.

Table of Contents

Other manuals for IKA C 1

Related product manuals