IKA C 6000 global standards - Evaluating Measurements; Calorific Value Input and Results

32
Click on auf the measurement to be evaluated.
Then click on the „Evaluation“ button. The fol-
lowing screen with several tabs appears. The para-
meters for the evaluation are distributed across the
„Gross Calorific Value“ and „Net Calorific Value“
tabs.
Note: The „Net Calorific Value“ tab is not shown
at calibration.
Now you can input the parameters required for
the standard that was selected (here: DIN 51900
(2000)). The purpose and meaning of these para-
meters and the relevant calculation formulae for
the complete results can be found in the respec-
tive standard. The screens are adapted to suit the
standard that was selected.
When you have completed the inputs, switch to
the „Results Sheet“ tab.
Here the complete data and results of the mea-
surement are presented. You can save and print
this form.
Click on OK to finish the evaluation. On each oc-
casion you can correct and extend the evaluation
for these measurements by looking them up in
the daily list or the library and selecting „Evalu-
ation“.
You can view the trial parameters once again un-
der the „Sample“ tab.
Evaluation