Click the „Menu on“ button to display the menu.
Use the scroll bar to display all the menu options.
If a measurement has been prepared or selec-
ted you will see only a restricted selection of the
menu options.
„Show/Hide Message Panel“: an information
field above the button toolbar is displayed or hid-
den.
„Help On“: This added the „Help“, „Servicing“
and „Hardware details“ tabs to the screen view
and displays an information window with system
information.
„Print List“: The list of measurements currently
displayed is printed (not in combination with se-
rial printer C1.50!).
„Sample Rack“: A tab with the assignment
and status of the sample rack (accessories) is dis-
played (see page 46).
„Delete selected measurement“: This dele-
tes the selected measurement from the displayed
list and also from the library. Sequential measure-
ments and those associated with a result cannot
be deleted.
„Exit“: This saves the measurements taken du-
ring the day; the cover of the calorimeter is
closed and the software shut down. After this,
switch off the calorimeter and all the accessories.
Never switch the device off without pre-
viously having run „End“, otherwise data
may be lost!
Menu
To Next Page
Loading...
