EasyManua.ls Logo

IKA Vacstar control - Technical Data

IKA Vacstar control
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
Technical data
Base unit Value
Pump rate max. [m³/h] 1.32
Pump rate max. [l/min] 22
Final pressure without gas ballast [mbar] 2
Suction levels [-] 4
Cylinder [-] 4
Connection diameter suction side [mm] 8
Connection diameter pressure side [mm] 8
Input pressure min. [mbar] 2
Input pressure max. [mbar] 1030
Boiling point detection [-] yes
Solvent library [-] yes
Analog speed vacuum control [-] yes
Speed control [-] Turning knob
Display [-] TFT
Pressure unit / scale [-] mbar, hPa, mmHg, Torr
Vacuum sensor [-] yes
Vacuum sensor type [-] ceramic Al2O3
Pressure max. for pressure sensor [bar] 1.2
Measurement range (absolute) min. [mbar] 1
Measurement range (absolute) max. [mbar] 1030
Resolution pressure [mbar] 1
Measurement uncertainty [mbar] 1
Venting valve [-] yes
Condensate trap [-] yes
Emission condenser [-] yes
Timer [-] yes
Noise at low. pressure [dB(A)] 54
Material in contact with medium [-] Al2O3, PTFE, FPM, PPS
Housing material [-] Alu-cast coating
Mode automatic [-] yes
Mode manual [-] yes
Mode pump % [-] yes
Mode program [-] yes
Width [mm] 270
Depth [mm] 500
Height [mm] 435
Weight [kg] 14
Permissible ambient temperature min. [°C] 5
Protection class II
Overvoltage category !
Degree of contamination 1
Use above max. MSL m 2000
Firmware update yes