What to do if my IKEA Cookers appliance stops due to high power supply?
If your IKEA cooker stops operating and shows an error, it may be due to the main power supply being over AC 275V. In this case, you should switch to a product with a suitable power supply.
What to do if IKEA Refrigerator does not operate?
If your IKEA Refrigerator isn't working, first ensure that the appliance is switched on. Check that the mains plug is correctly connected to the mains socket. If there's still no power, test the mains socket with another electrical appliance. If the socket isn't working, contact a qualified electrician.
What to do if my IKEA Cookers appliance stops due to high temperature or dry-boiling?
If your IKEA cooker stops and shows an error because the cookware is empty or the cooking temperature is too high, turn off the appliance and wait for 5 minutes before restarting. To prevent this, let the appliance cool down and avoid dry-boiling.
What to do if IKEA Indoor Furnishing says no cookware is detected?
If your IKEA Indoor Furnishing appliance stops and indicates no cookware or a diameter less than 120mm, place cookware on the cooking zone.
What to do if my IKEA Cookers appliance says there is no cookware?
If your IKEA cooker stops and displays an error indicating no cookware is detected or the cookware diameter is too small, place suitable cookware on the cooking zone.
What to do if IKEA Cookers temperature sensor is not working?
Please contact your nearest IKEA store.
What to do if my IKEA Hob stops operating and shows an error code E0?
If your IKEA hob stops operating and displays an error, it may be due to an internal exception. Turn off the appliance and restart it after 5 minutes. If the E0 error persists, please contact your nearest IKEA store.
Why does my IKEA Hob stop working and show an error if the main power supply is over AC 275V?
If your IKEA Hob stops operating and displays an error, it might be because the main power supply is over AC 275V. To fix this, change to a product suitable power supply.
What to do if my IKEA TILLREDA Hob stops operating and shows error E2?
If your IKEA Hob stops operating, shows an error E2 because the cookware is empty (dry-boiling) or the cooking temperature is too high, turn off the appliance and restart it after 5 minutes. If the error persists, please contact your nearest IKEA store.
Why does my IKEA TILLREDA Hob stop working and show an error if the cookware is empty?
If your IKEA Hob stops operating and shows an error when the cookware is empty or the cooking temperature is too high, it's likely due to dry-boiling. To resolve this, let the appliance cool down and take steps to prevent dry-boiling in the future.
Read instructions carefully, check packaging, handle materials safely, and keep children away from appliance and detergents.
Use original parts, install by authorised agent, check electrical connections, and ensure safe positioning and cable management.
Use for domestic purposes only, do not stand on door, use correct detergents, avoid drinking water, and handle plastic items carefully.
Connect to a grounded outlet, ensure voltage compatibility, and use the provided plug.
Provides a table of common faults, their possible causes, and troubleshooting steps to resolve issues.
Lists automatic fault codes, their meanings, and recommended actions to take when specific errors occur.
General| Power | 2000 W |
|---|---|
| Voltage | 220-240 V |
| Number of Burners | 1 |
| Frequency | 50-60 Hz |
| Type | Induction |
| Control Type | Touch control |
| Material | Glass |
To Next Page
